DJI Inspire 2 Professional
You save: $651 Tax: Included Shipping: Free
- The combo comprises the Zenmuse X5S and the Apple ProRes Activation Key.
- The perfect combo for aerial imaging. Please refer to in the box for full contents.
Inspire 2 Professional Combo
The Zenmuse X5S has an upgraded M4/3 sensor that shoots 20.8 MP photos and Apple ProRes video at up to 5.2K. Compared to previous DJI gimbal cameras, the X5S delivers a better signal-to-noise ratio and a dynamic range of up to 12.8 stops. With the Cendence remote controller and ultra-bright CrystalSky monitor, the Inspire 2 Professional Combo sets a new standard for aerial imaging, providing more creative possibilities.
Inspire 2 Premium Combo
The Premium Combo unleashes the full potential of the Zenmuse X5S camera, which records 5.2K CinemaDNG and Apple ProRes video. Two DJI CINESSDs included in the combo provide enough ample storage for professional cinematography. Also, the Cendence remote controller supports Dual-Operator mode, and the CrystalSky monitor helps professionals see their shot clearly, even in bright sunlight. This combo is perfect for professional filmmaking and post-production.
Inspire 2 Cinema Premium Combo
To meet the highest professional filmmaking standards, the Zenmuse X7 uses an S35 image sensor, offering 6K CinemaDNG RAW and a wide dynamic range of up to 14 stops. The X7 also introduces the DL-Mount, the world's first integrated aerial lens mount that allows for switching between four available prime lenses quickly and easily. With five 480 GB CINESSDs, eight Intelligent Flight Batteries for extended flight time, and the powerful combination of Cendence and CrystalSky, the Inspire 2 Cinema Premium Combo is all you need for masterful aerial cinematography.
DJI Inspire 2
POWER BEYOND IMAGINATION
The Inspire 1 was a revelation. The first filmmaking drone in the world to integrate an HD video transmission system, 360° rotating gimbal and a 4K camera, as well as the simplicity of app control. The launches of the Zenmuse X5 and X5R cameras further cemented the Inspire as a critical tool for filmmakers around the globe.
The Inspire 2 takes everything that was good about the Inspire 1 and improves it. An all-new image processing system records at up to 5.2K in CinemaDNG RAW, Apple ProRes and more. It goes from 0 to 50mph (80kph) in just 5 seconds and hits a maximum speed of 58mph (94kph) and has a max descent speed of 9m/s for unheard of speed and agility in an aircraft this size. A dual battery system prolongs the flight time to a maximum of 27 minutes (with an X4S), while self-heating technology allows it to fly even in low temperatures.
FlightAutonomy has been revised and developed specifically for the Inspire 2, providing two directions of obstacle avoidance and sensor redundancy. Increased intelligence adds multiple intelligent flight modes, including Spotlight Pro, giving even single pilots the ability to create complex, dramatic shots. An upgraded video transmission system is now capable of dual signal frequency and dual channel, streaming video from an onboard FPV camera and the main camera simultaneously, for better pilot and camera operator collaboration.
Magnesium aluminum composite shell and transforming design, carbon fiber arms.
Vision sensing, 2-axis FPV camera, range of supported cameras.
8mph (94kph) max speed, 2kg thrust per rotor, 15in props, maximum 27min flight time (with X4S).
Dual battery, self-heating, battery redundancy and 98Wh.
Material and Design
The grey magnalium shell of the Inspire 2 is more elegant than the previous plastic shell and adds higher strength and lighter weight. “T” junction airframe connections are now made of carbon fiber, creating a more integrated design that reduces weight while adding visual refinement.
Image Processing and storage
5.2K@4.2Gbps RAW video recording, CineCore 2.0, integrated DJI CINESSD.
FAT32/exFAT universal file system.
CinemaDNG* and Apple ProRes 5.2K video support, H.265 and H.264 video codec support, 4K video at 100Mbps.
*Recorded Video can be stored simultaneously on the DJI CINESSD and a Micro-SD card.
Signal frequency switching between 2.4 GHz and 5.8 GHz.
4.3 mi (7km)*
Multiple slave controllers supported
Extension port, HDMI port, USB port
*Unobstructed, free of interference, when FCC compliant.
PROFESSIONAL IMAGE QUALITY
Integrated into the Inspire 2 is the brand new CineCore 2.0 image processing system, capable of recording 5.2K videos in CinemaDNG*1, Apple ProRes*2 and more. By placing these parts inside the airframe, image data can be stored and processed more readily, while the CINESSD storage system itself can be better protected. It also means that the camera can be more lightweight, increasing aircraft agility and overall flight performance. CineCore 2.0 is compatible with the Zenmuse X4S and X5S for different shooting needs, and both cameras attach using a new gimbal port that is quicker to connect and more reliable.
(Currently compatible with X4S*3 and X5S).
5.2K (5280 x 2972, 16:9) 30fps 12bit, 4.2Gbps
4K (4096 x 2160, 17:9) 60fps 10bit, 4.0Gbps
5.2K (5280 x 2160, 2.4:1) 30fps (422 HQ)
4K (3840 x 2160, 16:9) 30fps (4444 XQ, no alpha)
Built-in 3D noise reduction, 3DLUT color management technology, advanced sensor correction.
H.264/AVC BP/MP/HP Level 5.1: 4K 60fps, 100Mbps;
H.265 MP Level 5.1: 4K 30fps, 100Mbps;
JPEG/DNG/JPEG+DNG 14fps in burst 20.8 MP*4
DNG 20fps continuous burst 20.8 MP*5
*1*2 Additional licenses required.
*3 X4S does not support DNG RAW or Apple ProRes
*4 Photos stored on Micro-SD card
*5 Photos stored on DJI CINESSD
2-Axis FPV Camera
Added to the front of the Inspire 2 is a 2-axis gimbal stabilized global shutter FPV camera with a controllable pitch range of 0° to -60°. Combined with the stabilization of its brushless gimbal, it effectively eliminates picture shake, leaving only a clear view of the scene ahead.
Using Lightbridge HD video transmission technology, its video feed transmits along with the feed from the primary camera to the DJI GO 4 app, so both operator and camera operator can get the view they need to capture complex shots. DJI GO 4 can be used to switch between different views, while both master and slave controller feeds maintain the same video quality, giving both pilot and camera operator a better overall experience.
The Inspire 2 creative workflow has been completely optimized and is now capable of recording video in CinemaDNG and Apple ProRes, and other common formats for post-production in filmmaking. Also supported are FAT32/exFAT* file systems, which allow fast copying of files direct from the CINESSD without additional software.
CONTROL, SENSE AND AVOID
Forward and downward facing dual stereo vision systems have a sensing field of view of 60° and 54° respectively, allowing the Inspire 2 to sense obstacles up to 30m away. The combination of wide angle of view and long range, allows the Inspire 2 to accurately calculate the distance required for braking. This offers flight at up to 34mph (54kph) with a 25° attitude without sacrificing obstacle avoidance protection. Infrared sensors on top of the aircraft provide upward obstacle sensing up to 16ft (5m), adding protection when flying in enclosed spaces. Obstacle sensing systems are active during normal flight, RTH and all Intelligent Flight Modes.
The Inspire 2 uses Visual Odometry (VO) technologies in its forward and downward stereo vision systems. When combined with data collected by the flight controller, it allows the Inspire 2 to hover accurately when flying indoors or without a satellite signal. Unlike a basic positioning system made up of a single optical flow sensor and dual ultrasonic sensors, the Inspire 2’s dual optical sensor system can capture the depth-of-field of the environment, making it more sensitive to the subtle movements of the aircraft.
VO technology also detects tiny changes in flight speed, records the flight path, and sends real-time position data to the flight controller. This creates high-precision flight and a hover accuracy that is more precise than when using satellite positioning alone. If GPS signal is lost when flying behind an obstacle, or when flying from indoors to outdoors, the Inspire 2 is able to hover in place when the control sticks are released, allowing filmmakers to shoot in a wider variety of locations.
Detect Landing Terrain
A vision positioning system made up of a single optical flow sensor - and ultrasonic sensors - can only collect altitude data using its ultrasonic systems, making it unable to generate accurate information about the terrain below. However, the Inspire 2’s stereo vision system will calculate the difference in height during auto-landing between the aircraft’s landing point, scanning the terrain in real time to ensure that the area is suitable for landing.
The QuickSpin function can be activated manually or automatically. In manual, set a custom button as QuickSpin in DJI GO 4, then when the gimbal comes close to reaching its rotation limit, press the button to spin the Inspire 2 360° in the same direction to free up gimbal movement. Automatic QuickSpin is easier to use, and when enabled, the Inspire 2 will automatically spin when the gimbal rotates over 270°. The Inspire 2 flies normally during a spin.
Precision Gimbal Control
Three damping balls and a damping board weighing just 40g - half the weight of previous damping boards - increase the damping capabilities of the Inspire 2 gimbal. Gimbal movement can now be customized through parameter settings built into DJI GO 4, giving operators the control they need to get the desired shot. A new gimbal control system increases control precision up to 0.01°, and is also powerful enough to carry an equivalent 90mm long lens. The new attitude controlled design allows the gimbal to automatically keep level, significantly reducing the likelihood of tilted horizons. The gimbal also has a new Follow Mode, which links the direction of the gimbal to the master controller, giving it the same control experience as the slave controller.
Spotlight Pro is a powerful tracking mode that allows even single pilots to capture complex, dramatic images. It uses advanced visual tracking algorithms to lock onto a subject during flight, regardless of the direction that the Inspire 2 flies, creating shots that would once have required a dedicated camera operator. If the gimbal comes close to reaching its rotation limits, the Inspire 2 itself will rotate in the same direction without affecting flight control or the shot being captured to free up gimbal movement.
It has two shooting modes, Quick Mode and Composition Mode. In Quick Mode, select an object to begin tracking. In Composition Mode, select the subject and the tracking position. When the subject enters the preset tracking position, press the shortcut to begin tracking. The gimbal can be moved during shooting for composition adjustments. Spotlight Pro is available in Intelligent Flight Modes TapFly, Waypoint, and Point of Interest.
INTELLIGENT FLIGHT MODES
In addition to Spotlight Pro, a range of other intelligent flight and shooting modes are available. Obstacle avoidance is optimized when using Point of Interest* and Waypoint* modes, making complex shots simple and repeatable. Also available are QuickSpin, TapFly and ActiveTrack, to simplify challenging shots.
The 2-axis onboard FPV camera separates the flight view from the main camera view, effectively giving the Inspire 2 a dedicated TapFly camera. Tap a point onscreen in the FPV view to set a flight route and the Inspire 2 will automatically fly along that route, leaving the pilot to focus on gimbal movement.
The ActiveTrack Mode allows the Inspire 2 to recognize a range of objects, from people to bikes to cars to boats. Tracking profiles that can be adjusted based on the subject being tracked means greater tracking precision.
SMART RETURN TO HOME
Forward and downward vision systems allow the Inspire 2 to create a real-time map of its flight route as it flies. If the video transmission system signal is lost and Smart Return Home is enabled, it is able to fly home along its original route, and change to a straight line when it regains a signal. As it returns, it will use the primary camera to identify obstacles as far as 200m in front, allowing it to plan a safe route home. It is also able to reconnect more quickly after losing connection.
VIDEO TRANSMISSION SYSTEM
The latest update to DJI Lightbridge technology has an effective transmission distance of up to 4.3mi (7km)* and is capable of delivering both 1080p/720p video as well as the FPV view to pilot and camera operator. Users can also switch between 2.4GHz and 5.8GHz** control frequencies to cut through noise for greater signal stability.
*Unobstructed, free of interference, FCC compliant.
**5.8GHz transmission is not available in some regions due to local regulations.
2.4/5.8GHz Control Frequencies
Selectable 2.4GHz and 5.8GHz frequencies are supported by the Inspire 2. Generally speaking, a 2.4GHz Wi-Fi video transmission system is used with a 5.8GHz remote control link providing aircraft control. This is because if the video transmission and the remote control links use the same frequency, interference between the two may cause signal loss. This same rationale is why interference may be caused by other users of radio frequencies in surrounding areas. The Inspire 2’s new Lightbridge HD video transmission system uses a Time-division multiplexing mechanism to transmit both video feed and remote control signals on the same frequency.
In urban areas, the 2.4GHz frequency band may suffer from high levels of signal interference from sources such as Wi-Fi routers and 4G base stations. As an option, the 5.8GHz frequency provides a broader communication bandwidth and has more available channels for transmission, making it more suitable for stable signal transmission in these types of environments. After powering on, the Inspire 2 automatically scans the environment and selects the band with the least amount of interference, ensuring optimum video feed quality and remote control reliability.
Master and Slave Controllers
A new wireless HD image transmission technology sends video information from the master controller to the slave controller and the two controllers can be up to 100m apart without loss of image quality.
Broadcasters can broadcast direct from the Inspire 2 using its dedicated 1080i50 and 720p60 transmission signal. Aerial live-streaming direct to TV is as simple as connecting the Inspire 2 remote controller to the satellite truck. Once connected to broadcasting equipment, footage can be sent live on-air without signal conversion. Additionally, while pilots maintain a real-time view of the flight, a short delay has been added to the optimized HDMI output, offering smoother playback and more stable frame rates.
POWERFUL FLIGHT PERFORMANCE
A new propulsion system optimized for power creates a new level of flight performance. The Inspire 2 flies at up to 58mph (94kph) descends at 9m/s and climbs at 6m/s. It can accelerate from 0 to 50mph (80kph) in just 5 seconds and flies at a max attitude angle of 40°. The two controller sticks are tuned for more sensitivity, making delicate maneuvers easier. More power also allows the Inspire 2 to fly in more extreme conditions, including over 2500-5000m above sea level (using optional dedicated propellers), and in temperatures as low as -4°F (-20°C) using self-heating Intelligent Flight Batteries.
Agility and Maneuverability
The Inspire 2’s H-shaped frame arms hold 15-inch propellers that form part of a two horsepower propulsion system, significantly enhancing top speed and acceleration. As every increment in speed creates new challenges, many technological hurdles were overcome to realize the Inspire 2’s 58mph (94kph) top speed. This required the creation of a finely tuned propulsion system, redesigned motors with a 3° camber angle for more stable pitch, roll and yaw as well as an advanced flight control system, air resistance reduction, and stability enhancement. Additionally, its advanced fast-acting flight control system allows the Inspire 2 to descend at a rapid 9m/s.
Attitude algorithms have been comprehensively improved, increasing the sensitivity of the control sticks, so that pilots can fly with greater precision. Flight parameters can now also be adjusted in the DJI GO 4 app, giving pilots the ability to tune the Inspire 2 to fly the way they need it to. Tripod Mode also comes to the Inspire 2, for ultra-fine flying or slow graceful movements.
Extreme Weather Durability
The Inspire 2’s extremely robust attitude control algorithm allows it to fly in more types of extreme weather. It can fly at up to 2500m above sea level using standard propellers. This is increased to a maximum of 5000m when using the optional high altitude propellers. Self-heating technology is built into its Intelligent Flight Batteries, allowing it to fly in temperatures as low as -4°F (-20°C).
Reliability has been further enhanced through dual redundancy of key modules such as the IMU and barometer. The intelligent flight control system monitors the redundancy system, giving it accurate flight data.The new obstacle sensing system helps the Inspire 2 sense and avoid obstacles, minimizing the risk of collision.
Dual-Signal Propulsion System
Dual-signal ESCs bring an extra layer of redundancy to the Inspire 2. In normal use, ESC commands are sent using PWM signals. If this is lost, however, commands will be sent through the serial port. The ESC also inherits the Inspire 1’s advanced patented algorithms, offering functional and propulsion redundancy. Combined together, these systems significantly increase the Inspire 2’s reliability.
A transforming structure and dual battery design make the Inspire 2 easy to travel with. Simply press the Power Button five times and the system will cut power to the gimbal. Once the camera is removed, the aircraft will automatically enter Travel Mode. Simply place the aircraft in its carrying case and it is ready to go. To move back into Landing Mode, press the Power Button five times and the landing gear will extend. Additionally, the camera can be attached without switching off the aircraft, minimizing setup time.
The standard Carrying Case is designed to hold everything needed for an outdoor shoot, including a Battery Charging Station, 180W Battery Charger, camera and more, all in an efficient and easy to carry form. Both Inspire 2 batteries are 98Wh and are compliant with the requirements of civil aviation regulators.
Dual Battery Design
A dual-battery design using a pair of 98Wh batteries gives the Inspire 2 an extended flight time as well as battery redundancy. As the two batteries connect in parallel, if one fails during a flight, the other will be able to provide power for a safe return to home. To ensure the batteries are properly installed, the battery release button is made up of a center button and a ring button. When the battery is installed correctly, both buttons will pop out. A sensor in the battery compartment also checks that the batteries are properly installed. A notification will appear in DJI GO 4 if it detects a problem.
Upgraded Intelligent Flight Battery
The new Inspire 2 battery uses higher performance and a higher density battery cell with an overall larger capacity as well as an updated management unit. Its performance in low temperature environments has been optimized with a built-in 70W self-heating system capable of heating itself to 41°F (5°C) every minute. This self-heating function can be enabled either automatically or manually. The management unit constantly monitors battery status, making all information, including battery level and battery temperature, easily visible in DJI GO 4.
OPTIONAL ACCESSORIES TO ENHANCE PERFORMANCE
A series of powerful DJI accessories help improve work efficiency and give filmmakers more creative opportunities.
DJI CINESSD Station
The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer.
DJI CINESSD uses an NVMe logical device interface specification, features four PCI Express* ports and supports FAT32/exFAT** file formats. It comes in 120GB，240GB and 480GB. When using a 240GB or 480GB CINESSD, the Inspire 2 can record videos at write speeds of up to 4.2Gbps, providing enough data to meet demanding filmmaking needs.
*PCI Express 3.0
Inspire 2 Activation Key of RAW & Apple ProRes
Inspire 2 Activation Key of RAW & Apple ProRes allow CineCore 2.0 to record in CinemaDNG and Apple ProRes. These are available for purchase separately and allow the Zenmuse X5S camera to produce the exact file type needed for individual post-production requirements.
*Maximum video resolution is subject to DJI CINESSD capacity.
A 5.5inch, 1000 cd/m² display, a 7.85inch 1000 cd/m² display and a 7.85inch 2000 cd/m² display, are all designed by DJI to offer the brightness and clarity needed when shooting outdoors. A powerful video decoder integrated in these displays create smooth video and integrated image enhancement increases performance in bright environments. All these displays are operational from -4°F (-20°C) to 104°F (40°C) and are made to work with a replaceable external battery.
DJI Focus adds remote focus control to the Zenmuse X4S and X5S.
Battery Charging Station**
An 800W Battery Charging Station charges up to eight Inspire 2 batteries. With additional space for storing four Intelligent Flight Batteries and a standard battery charger. The Battery Charging Station is also equipped with two USB charging ports.
4G-LTE Network Connection**
The Inspire 2 supports control over 4G. This high bandwidth allows the Inspire 2 to transmit high quality videos to a network server or can be used for ultra-long distance control. It also cuts video transmission latency to 500ms.
An all-new handheld camera mount is compatible with the Zenmuse X4S and the Zenmuse X5S, bringing these cameras down to the ground for more flexible filmmaking.
Remote Controller GPS Module
A GPS Module for the Remote Controller improves the accuracy of the remote controller’s positioning. Used with the Inspire 2’s Dynamic Home point function which constantly updates the latest location of the remote controller as its Home point, it allows accurate Return to Home when moving around an environment.
Equipped with an uprated Micro 4/3 sensor, the Zenmuse X5S has a dynamic range of 12.8 stops with a much improved signal to noise ratio and color sensitivity than the X5R. It supports up to eight standard M4/3 lenses (including zoom lenses) with focal lengths ranging from 9mm-45mm (equivalent to 18mm-90mm on a 35mm camera), allowing more creative flexibility.
The new CineCore 2.0 image processing system on the Inspire 2 makes the Zenmuse X5S capable of capturing 5.2K 30fps CinemaDNG video and Apple ProRes video* as well as 4K 60fps using H.264 and 4K 30fps using H.265 (both at 100Mbps). Continuous DNG burst shooting at 20fps with 20.8MP images is also supported. The Zenmuse X5S was designed to keep pace with the rigors of high-end professional aerial imaging.
*You may need to purchase a license key to record with CinemaDNG or Apple ProRes.
INSPIRE 2 AERIAL IMAGING
Compared with the Inspire 1, the Inspire 2 utilizes an innovative structure that separates the CineCore 2.0 image processing system from the camera and places it inside the aircraft. This means that the sensor and optical system are detachable and easily connected using a newly designed quick-release connector. Designing the camera system in this way effectively protects the sensor from magnetic interference originating from the processor. It also allows a range of lightweight camera units to be connected as required by different scenes. The uprated M4/3 sensor — and support for interchangeable lenses — allows the Zenmuse X5S to capture high resolution images of incredibly high quality, when combined with the extraordinary CineCore 2.0 image processing system.
IMPROVED MICRO 4/3 SENSOR
The onboard Micro 4/3 sensor has been upgraded, significantly improving image quality. With a pixel size of 3.4μm, this 20.8-megapixel sensor captures more detail than the previous sensor. It has 12.8 stops of dynamic range as well as a better signal to noise ratio and color sensitivity than the X5R, allowing it to create clear, low noise images in low light environments.
ARRAY OF COMPATIBLE LENSES
Since it uses a standard Micro 4/3 mount, the Zenmuse X5S now supports up to eight professional lenses* with focal lengths ranging from 9mm-45mm (equivalent to 18mm-90mm on a 35mm camera), providing more creative control over the final look of a shot.
Olympus M.Zuiko 12mm/2.0
Olympus M.Zuiko 17mm/1.8
Olympus M.Zuiko 25mm/1.8
Olympus M.Zuiko 45mm/1.8
Olympus M.Zuiko 9-18mm/4.0-5.6
DJI MFT 15mm/1.7 ASPH
Panasonic Lumix 15mm/1.7
Panasonic Lumix 14-42mm/3.5-5.6 HD
*A balancing ring is needed for some lenses. More compatible lenses will be available.
Using CineCore 2.0, the Zenmuse X5S records video at a maximum resolution of 5.2K/30fps in CinemaDNG 12bit1, 5.2K 30fps Apple ProRes 422 HQ and 4K 30fps Apple ProRes 4444 XQ (no alpha)2.
Additional recording options include video in 4K/60fps using H.264 or oversampling video in 4K/30fps using H.264/H.265, both with a bitrate of 100Mbps.
1 2 Additional licenses required
FAST, EFFICIENT WORKFLOWS
The DJI CINESSD card (PCIe3.0 NVMe SSD support) and a highly optimized FAT32/exFAT file system, allows Zenmuse X5S footage to be transferred directly through the DJI CINESSD STATION card reader to a computer at high speeds without any additional software. Footage also supports the DIT standard. CinemaDNG or Apple ProRes workflows can be used for post-processing.
LOSSLESS IN-VIDEO SINGLE AND BURST PHOTO CAPTURE
Using only the Micro SD card, 20.8MP stills can be captured at 14fps in Burst Mode in JPEG+DNG. Using the DJI CINESSD opens up 20fps continuous DNG Burst Mode with a maximum image resolution of 20.8 megapixels. Stills can also be taken during video recording without interruption.
ENHANCED CAMERA STABILIZATION
Stabilizing the Zenmuse X5S is a highly optimized 3-axis gimbal with pinpoint-precise motor rotation with a control accuracy of ±0.01° powered by a dedicated processor.Rather than rely on electrical slip rings — as is common with many gimbals — the Zenmuse X5S uses a unique mechanically limited design and c oncealed wires to ensuremore stable data transmission and greater durability.
Vibration is eliminated using three damping balls and a lightweight damping board, creating seamlessly smooth video. 360° rotation remains possible through gimbal rotation and smooth aircraft yaw. Stable, smooth footage1 can be captured even when using a 90mm2 lens.
1Equivalent to 35mm camera’s standard focal length
2Exposure time must be equal to or longer than 1/60 in GPS mode
DJI AERIAL SYSTEM COMPATIBILITY
Take control over every camera setting from afar, including focus, aperture, and format, directly in the DJI GO 4 app. Precision control also extends to focus, with DJI GO 4 and the optional DJI Focus, offering focus control across the entire transmission range. Using DJI Focus, no additional cables or motors are needed and new Lightbridge technology sends all signals as far as 4.3mi (7km) away*.
* Unobstructed, free of interference, when FCC compliant.
The Cendence remote controller is a professional-grade, customizable remote controller designed for full integration with other advanced DJI products like the Inspire 2 and CrystalSky monitor.
The Cendence remote controller is a professional-grade, customizable remote controller designed for full integration with other advanced DJI products like the Inspire 2 and CrystalSky monitor.
Dials, Levers and Knobs
The two knobs on the front panel control gimbal pitch and yaw, and the right/left levers and Focus Adjustment Knob.
For quick camera adjustments, you can customize several shortcut buttons for particular groups of settings, or save frequently used settings.
Customizable buttons can quickly enable or disable frequently used functions like focus peaking, color waveform, obstacle avoidance, and home point resetting. They can also close warnings and tips mid-flight, all without using an app.
Rotate the dials or toggle the right/left levers while holding certain buttons to control gimbal roll, shutter speed, or ISO.
Detachable Design & CrystalSky Compatibility
The CrystalSky monitor mounts to the Cendence remote controller via the Cendence Monitor Mounting Bracket. The Cendence remote controller’s antennas, PCB, mounting bracket, and battery are all detachable, making its hardware easily upgradable, allowing you to customize the controller for compatibility with future DJI aircraft.
Dual Operator Control
When precision camera control is required, Cendence can connect either as a Master or Slave controller with the Inspire 2’s remote controller or another Cendence remote controller.
Dual-Frequency Directional Antennas
Cendence’s redesigned planar antennas significantly increase gain, ensuring high-quality video transmission at up to 10 Mbps within 4 km. Higher gain also extends the max transmission distance from 7 km to 10 km. Moreover, the antennas transmit signal in a specific direction, which effectively reduces interference from other directions and makes transmission even more stable and reliable.
The Cendence remote controller uses a detachable battery that operates for up to four hours. If you run out of power, just swap in a charged battery or charge Cendence via the power port. Cendence uses the same batteries as CrystalSky monitor for enhanced product synergy.
1. SDI and HDMI ports support broadcasting at 1080i 50 fps and 720p 60 fps.
2. Connect DJI Focus, or other compatible accessories via the CAN port.
3. The USBA port supports connectivity with other mobile devices.
Cendence is currently compatible with DJI Inspire 2 aircraft.
Two Fast Replacements
DJI Care Refresh offers up to two replacement units* within one year, giving you total peace of mind.
Covers accidents, such as user error and collisions. We’ll replace your aircraft even if it’s water damaged
VIP After-sales Service
Get prioritized support and skilled advice from DJI’s product experts.All shipping fees are covered by DJI.